It is one of the most frustrating messages in Windows: “This PC can’t run Windows 11.” With Windows 10 support ended in October 2025 and Windows 11 24H2 out of updates for Home and Pro since October 13, 2026, more people than ever are hitting it while trying to move to a supported system. The surprise is that, on most reasonably modern computers, the hardware is perfectly capable and the real culprit is a pair of firmware settings. This guide shows how to check your PC, switch the right options on, and retry the install.
Why the error appears, and why it is usually fixable
Windows 11 requires TPM 2.0, UEFI firmware and Secure Boot support. Plenty of motherboards and laptops ship with those features turned off, or with the firmware running in an older compatibility mode, so the installer reports a failure even though the chip is present. A detail worth knowing comes from Microsoft’s own security documentation, which states that “TPM 2.0 is not supported in Legacy and CSM Modes of the BIOS.” In other words, if your firmware is running in legacy mode, the fix is to change the mode, not replace the PC.
Solving this properly also sets you up for a clean, licensed installation afterwards. If you are rebuilding the machine for work or want features like BitLocker management, Remote Desktop hosting and Hyper-V, a Windows 11 Pro activation key is the edition to plan around, and having it ready means you can activate the moment the install finishes.
Step 1: Check what your PC actually supports
Start by finding out which requirement is failing. Install Microsoft’s PC Health Check app and select Check now, which reports exactly which items are blocking you. Then verify the details yourself. Press the Windows key and R, type tpm.msc, and press Enter. If the window shows that the TPM is ready, check the Specification Version under TPM Manufacturer Information and confirm that it reads 2.0. Next, press the Windows key and R again, type msinfo32, and press Enter. Look at BIOS Mode, which should say UEFI, and Secure Boot State, which should say On.
If BIOS Mode says Legacy, or Secure Boot State says Off or Unsupported, you have found your problem. For a typical home or gaming PC, a Windows 11 Home license key covers everything once the hardware checks pass, so there is no need to buy anything new to fix a settings issue.
Step 2: Enable TPM 2.0 in the BIOS
Restart your PC and enter the BIOS or UEFI setup, usually by pressing Del, F2, F10 or Esc during startup. Look in the Security, Advanced or Trusted Computing sections. On Intel systems the option is usually called Intel Platform Trust Technology or PTT, and on AMD systems it is typically AMD fTPM. On some boards it appears simply as TPM Device or Security Device Support. Set it to Enabled, then save your changes and exit.
Step 3: Enable Secure Boot
Back in the BIOS, open the Boot, Security or Authentication section and find Secure Boot. If it is greyed out, disable Legacy Boot or the Compatibility Support Module, usually shown as CSM, and set the boot mode to UEFI. Then set Secure Boot to Enabled and save.
If the option still will not turn on, your system disk may be using the older MBR layout instead of GPT. Windows includes a built-in tool for this situation. Back up your data first, then open Command Prompt as administrator and run mbr2gpt /validate /allowFullOS. If validation succeeds, run mbr2gpt /convert /allowFullOS, then restart, enter the BIOS, switch to UEFI mode and enable Secure Boot.
Step 4: Run the check again and retry the install
Boot into Windows and open PC Health Check once more. If everything now shows as passing, run your upgrade through Windows Update or start Setup from a bootable USB drive. Afterwards, open Settings, go to System, then Activation, and confirm that Windows is activated.
What if it is still blocked?
Check your motherboard or laptop manufacturer’s support page for a BIOS update, since newer firmware often adds or exposes TPM options. Confirm that your processor is on Microsoft’s supported list, and check that you have at least 4 GB of RAM and 64 GB of storage. If the hardware genuinely falls short, the safest path is to plan a hardware upgrade rather than leave the machine unpatched on a system that no longer receives security fixes.
Final thoughts
Most “can’t run Windows 11” errors come down to two switches in the BIOS, not a dead end. Check what is failing, enable TPM and Secure Boot, switch to UEFI mode if needed, and try again. A few minutes in the firmware menu can save you from replacing a machine that is perfectly capable of running a supported operating system.